Deskripsi

The brand new Unicorn series is an inverter/charger that supports utility charging, oil generator charging, solar charging, dual output from utility or inverter, multiple operating modes, and smart energy management. It supports parallel operation for multiple units in single phase or three phase. The inverter with power of 3.5KW and 6KW perfectly suits residential applications, schools, health facilities, government buildings, and areas where the electricity is unstable.

 

Features:

• Applicable for pure off grid / backup power / self-consumption
• PV input voltage range: 80Vdc-500Vdc
• PV input current up to 32A
• Supports battery mode & non battery mode
• Battery & PV reverse polarity protection
• Dual pure sine wave output
• Supports single-phase or three-phase parallel operation (up to 16 units)
• Sleep mode triggered by low power output or low battery voltage
• Independent BMS communication interface
• Built-in WiFi for mobile monitoring *
• Isolated RS485 interface : Connects with Bluetooth, WiFi, 4G, etc.
• Optional 320 x 480 high-resolution color LCD screen or monochrome screen
• Historical data recording function, storage capacity of 25000 records
• Comprehensive electronic protection ensures safer and more stable operation
• IP20 enclosure design with anti-dust kit

*Only applicable to color screen series

 

TECHNICAL SPECIFICATION:

Utility Input 

Utility Input Voltage : 176VAC – 264VAC (Default), 90VAC – 285VAC (Configurable)

Utility Input Frequency : 45Hz – 65Hz

Max. Utility Charging Current : 100A

Switch Response Time : Switch Response Time – Inverter to Utility: 10ms;

Switch Response Time – Utility to Inverter (when the load power is higher than 100W): 20ms

Inverter output

Utility Output Voltage : 176VAC to 264VAC

Utility Output Frequency : 45Hz to 65Hz

Rated Output Power : 100W~5500W (Default: 3400W)

Power Factor : 0.99

Inverter output

Inverter Rated Power (@30°C) : 5500W

3-second Transient Surge Output Power : 8500W

Inverter Output Voltage : 220/230VAC±3%

Inverter Frequency : 50/60Hz±0.2%

Output Voltage Waveform : Pure sine wave

Load Power Factor : 0.2-1(VA ≤ Rated output power)

THDu (Total Harmonic Voltage Distortion : ≤3% (48V resistive load)

Max. Load Efficiency : 92%

Max. Inverter Efficiency : 94%

Max. Main Load : 5500W

Max. Second Load : 5500W

Main Output Cut-Off Voltage :  Equal to “UVW (Under Voltage Warning Voltage)”

Second Output Cut-Off Voltage :  Equal to “LVD (Low Voltage Disconnect Voltage)”

Dual Output Recovery Voltage :  Equal to “LVR (Low Voltage Reconnect Voltage)”

Solar controller

PV Max. Open-Circuit Voltage : 500V (At minimum operating environment temperature) 440V (At 25℃)

MPPT Voltage Range : 85V- 450V

Number of MPPTs : 2

PV Max. Input Current : Two ways, 2x16A

PV Max. Short-Circuit Current : Two ways, 2x18A

PV Max. Input Power : 2×3300W

PV Max. Charging Current : 100A

MPPT Max. Efficiency : ≥99.5%

Battery

Battery Rated Voltage : 48VDC

Battery Work Voltage Range : 40.8VDC to 64.0VDC

Battery Max. Charging Current : 100A

Others

No-load Losses : ≤1.1A (Test condition: Utility, PV and Load are disconnected, AC output is ON, fan stops, @48V input)

Standby Current : ≤0.8A (Test condition: Utility, PV and Load are disconnected, AC output is OFF, fan stops, @48V input)

Communication with BMS : RS485

Communication with Portal : RS485

Parallel Function : Yes, 12 units for standard configuration, up to 16 units

Work Temperature Range : -20℃ to +50℃ (When the environment temperature exceeds 30℃, the actual output power is reduced appropriately)

Storage Temperature Range : -25°C -+60°C

Enclosure : IP20 (With anti-dust kit)

Relative Humidity : <95% (N.C.)

Altitude : <4000M (If the altitude exceeds 2000 meters, the actual output power is reduced appropriately)

Certifications and Standards :IEC 62109-1, IEC 62109-2, IEC 61683, IEC 62368

Mechanical parameters

Dimension (Length x Width x Height) in mm : 590 × 300 × 163

Mounting Size (Length x Width) : 568mm × 245mm

Mounting Hole Size : Φ9mm / Φ10mm

Net Weight : 15.5Kg